MB2 Operation Manual
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
#menu(MenuBarEng)
*G.I.M.I.C Operation Manual [#ga78df15]
This page explains how to operate G.I.M.I.C motherboard.~
#contents
**Things to prepare [#qca4996c]
You need the items below to operate G.I.M.I.C:~
***USB Micro-B cable [#dd6420e9]
To connect G.I.M.I.C to your PC. G.I.M.I.C also draws pow...
A low-quality cable may cause signal degradation or power...
Use a cable that can fast-charge a smartphone to avoid su...
For reference, below are the cables we employed during th...
Straight~
Motorola ECOMOTO : SKN6378A~
Right angled~
Sony Ericsson : EC600L~
'''Note that some cables shipped with smartphones or tabl...
'''Make sure that your cable offers data transfer too.'''~
***A microSD card (optional) [#pddecfb0]
From which G.I.M.I.C reads song files when in standalone ...
G.I.M.I.C can handle SD/SDHC cards with up to 32GB capaci...
We have confirmed that UHS-I cards can be used, but they ...
For reference, below are the cards we employed during the...
SanDisk MobileUltra microSDHC UHS-I 8GB : SDSDQY-008G-J35A~
SanDisk Extreme Pro microSDHC UHS-I 8GB : SDSDQXP-008G-J35~
SanDisk Extreme Pro microSDHC UHS-I 16GB : SDSDQXP-016G-J...
***A pair of headphones, earphones, or other loudspeakers...
G.I.M.I.C outputs audio signals through a 3.5mm mini-ster...
Recommended impedance range is from 16 Ω to 300 Ω for the...
In addition, the pro model (GMC-MB2PRO) can be connected ...
***A breakout cable (for GMC-MB2PRO only; optional) [#rd9...
This provides additional I/Os, namely:~
-A 6.5mm phone jack (referred above)
-Line OUT x 4 (STEREO 2 paths)
-MIDI I/O (for future projects; currently without use)
We recommend using either the 6.5mm phone jack or the lin...
Be sure to use ALVA Babyface (BF-BOCMKH). Use of other ca...
***An AC adaptor (for GMC-MB2PRO only; optional) [#y71e83...
Drawing power from an external supply, you can avail your...
Use an AC adaptor with an output voltage of 5V, a currenc...
''Do not use an AC adaptor with an output voltage exceedi...
For reference, below is the AC adaptor we employed during...
AC adaptor for SONY PSP1000/2000/3000 series: PSP-100~
**Anatomy [#gec80bfb]
The picture is of a prototype and has some minor differen...
***Module-loading Side [#nfa74a03]
|Professional edition|Lite edition|
|&ref(doc_001.png);|&ref(doc_004.png);|
1: USB Port~
USB Micro-B Port for power supply and connection to a PC.~
2: DC IN (only in GMC-MB2PRO)~
Insert here the power extension cable (included in the GM...
3: microSD card slot~
4: Breakout connector (only in GMC-MB2PRO)~
5: Reset Switch~
Resets G.I.M.I.C to the initial state, i.e. the state it'...
6: 3.5mm mini-stereo jack~
Connect your headphones / loudspeakers here.~
7: Jog Wheel (or Volume Pot in GMC-MB2LT)~
Std/Pro G.I.M.I.C can be controlled through this wheel by...
Lite edition has a volume pot in place of the jog wheel. ...
8: Extention I/F (currently not in use)~
To connect accessories to be released in the future.~
9: Host I/F~
Connect a sound chip module to this port.~
10: USB Standard-A port (only in GMC-MB2PRO; currently no...
For a future project to control USB devices from G.I.M.I....
Supplies 100mA of output current.~
11: Front Panel Header~
To be used with Abee aluminium case.~
***Component Side [#b6873f98]
|Professional edition|Lite edition|
|&ref(doc_002.png);|&ref(doc_005.png);|
1: Power Switch~
2: The POWER & the STATUS LEDs~
Indicate the current power state and operation mode.~
3: Analog IN Jack~
To feed in the analogue output from modules.~
4: Expansion Module Slot (currently not in use)~
To be used for future expansion.~
Note that it's NOT a slot for a button cell battery.~
***Breakout cable (for GMC-MB2PRO only) [#db67e6fb]
&ref(doc_003.png);~
1: MIDI I/O (currently not in use)~
For future project for G.I.M.I.C to be used as a MIDI ins...
2: Line I/O~
We adapted BF-BOCMKH for our particular use, so that the ...
-Parallel-out OFF (default)~
Line IN : outputs no signal~
Line OUT: outputs all audio signals (PCM and other sounds...
-Parallel-out ON~
Line IN : outputs audio signals from the module currently...
Line OUT: outputs PCM sounds~
Output signal from the "Line IN" port bypasses G.I.M.I.C'...
3: 6.5mm phone jack~
Use this instead of the 3.5mm jack on the motherboard for...
4: Connector to GMC-MB2PRO~
**Before You Start [#tfc1e19e]
There are a few steps to follow before you start up your ...
***Updating the Firmware [#x4cad2a7]
Please update the G.I.M.I.C firmware to the latest versio...
***Installing the Driver [#dac0c7a4]
For your PC to recognize G.I.M.I.C as a USB Device, it ei...
-G.I.M.I.C driver ver. 2013/05/23: &ref(gimic-win-driver-...
// この箇所、ドライバ更新に合わせてアップデートすること
After extracting the .7z, run &color(red){dpinst-x86.exe}...
Users of 64-bit OS should run &color(red){dpinst-amd64.ex...
***Preparation for third-party applications [#j10a104c]
You need to install c86ctl to be able to control G.I.M.I....
Download the latest version from the link below.~
-c86ctl v1.4.4 (2013/10/13): &ref(c86ctl_1.4.4_32bit.zip);~
// c86ctl 更新に合わせてアップデートすること
Copy the extracted c86ctl.dll to the same directory as th...
Also, c86ctl depends on Visual C++ 2010 Runtime. Install ...
-[[Microsoft Visual C++ 2010 SP1 Redistributable Package ...
***Preparing Song Files [#x7acd568]
You can find song files to be used for test purposes [[he...
When G.I.M.I.C is in USB mode, files can be played from t...
G.I.M.I.C can also play songs without the aid of external...
**Controlling G.I.M.I.C [#yee9eee8]
G.I.M.I.C can operate in two modes: Standalone mode and U...
The way G.I.M.I.C is controlled varies depending on which...
***Connecting to the power source [#j48c22df]
Connect G.I.M.I.C to a PC via USB, or to an external powe...
-When AC adaptor is connected before USB, the STATUS LED ...
-Note that G.I.M.I.C determines whether its power is supp...
***Standalone mode [#g4ce196e]
'''This section is an abstract from a more fully detailed...
-Start a terminal emulator that can emulate VT100 (such a...
-Make sure that an SD card is inserted in the card slot (...
-Press the power switch. The POWER LED will light up and ...
When the OS has successfully started, the terminal emulat...
-Press any key on your keyboard.~
Filer screen will show up, where you can control G.I.M.I....
Below is the list of controls.~
Up-arrow move the cursor up
Down-arrow move the cursor down
Right-arrow play the next song
Left-arrow play the previous song
PageUp scroll up one page
PageDown scroll down one page
HOME move to the previous folder
END move to the next folder
ENTER play song file / open folder
BackSpace move up one folder
F1 toggle AUTO (next song is automatically play...
F2 stop playing
F3 +1 to the number of times songs are looped
F4 -1 to the number of times songs are looped
F5 tempo up
F6 tempo down
F7 change playback mode (normal/repeat current ...
F8 go to the setup screen
-Using the Jog Wheel (Pro/Std only)~
You can also control G.I.M.I.C with the jog wheel on the ...
To enable this feature, press in the jog wheel after star...
Each time you press the jog wheel, the STATUS LED alterna...
This indicates the current set of function the jog wheel ...
--When the LED is off~
Turning the wheel: change output volume~
Turning the wheel while pressing it: play/stop~
--When the LED is on~
Turning the wheel: play next/previous song~
Turning the wheel while pressing it: open next/previous f...
***USB mode [#p7b406d9]
'''This section is an abstract from a more fully detailed...
-Make sure that there is no SD card inserted in the card ...
-Press the power switch.~
Power/Status LED will light up and G.I.M.I.C's OS will be...
-When the OS has successfully started, the PC will recogn...
If it's the first time you connect G.I.M.I.C to the PC, y...
-Launch any applications that support G.I.M.I.C~
-Using the Jog Wheel~
Turning the wheel changes output volume.~
Pressing the wheel toggles parallel output on/off. Each t...
|>|>|Parallel Output|
|STATUS LED|off|on|
|Line IN|unused|audio signals from the module|
|Line OUT|all audio signals|PCM sounds|
***Turning off your G.I.M.I.C [#se9be492]
Press the power switch to cut off the power. G.I.M.I.C wi...
G.I.M.I.C continues to consume a small amount of power wh...
***Supplementary Information [#ia61c357]
-Breakout cable's Line "IN" and OUT: which to use?~
Line OUT is generally better suited for connection with a...
Line IN is better suited for connection with a high-spec ...
終了行:
#menu(MenuBarEng)
*G.I.M.I.C Operation Manual [#ga78df15]
This page explains how to operate G.I.M.I.C motherboard.~
#contents
**Things to prepare [#qca4996c]
You need the items below to operate G.I.M.I.C:~
***USB Micro-B cable [#dd6420e9]
To connect G.I.M.I.C to your PC. G.I.M.I.C also draws pow...
A low-quality cable may cause signal degradation or power...
Use a cable that can fast-charge a smartphone to avoid su...
For reference, below are the cables we employed during th...
Straight~
Motorola ECOMOTO : SKN6378A~
Right angled~
Sony Ericsson : EC600L~
'''Note that some cables shipped with smartphones or tabl...
'''Make sure that your cable offers data transfer too.'''~
***A microSD card (optional) [#pddecfb0]
From which G.I.M.I.C reads song files when in standalone ...
G.I.M.I.C can handle SD/SDHC cards with up to 32GB capaci...
We have confirmed that UHS-I cards can be used, but they ...
For reference, below are the cards we employed during the...
SanDisk MobileUltra microSDHC UHS-I 8GB : SDSDQY-008G-J35A~
SanDisk Extreme Pro microSDHC UHS-I 8GB : SDSDQXP-008G-J35~
SanDisk Extreme Pro microSDHC UHS-I 16GB : SDSDQXP-016G-J...
***A pair of headphones, earphones, or other loudspeakers...
G.I.M.I.C outputs audio signals through a 3.5mm mini-ster...
Recommended impedance range is from 16 Ω to 300 Ω for the...
In addition, the pro model (GMC-MB2PRO) can be connected ...
***A breakout cable (for GMC-MB2PRO only; optional) [#rd9...
This provides additional I/Os, namely:~
-A 6.5mm phone jack (referred above)
-Line OUT x 4 (STEREO 2 paths)
-MIDI I/O (for future projects; currently without use)
We recommend using either the 6.5mm phone jack or the lin...
Be sure to use ALVA Babyface (BF-BOCMKH). Use of other ca...
***An AC adaptor (for GMC-MB2PRO only; optional) [#y71e83...
Drawing power from an external supply, you can avail your...
Use an AC adaptor with an output voltage of 5V, a currenc...
''Do not use an AC adaptor with an output voltage exceedi...
For reference, below is the AC adaptor we employed during...
AC adaptor for SONY PSP1000/2000/3000 series: PSP-100~
**Anatomy [#gec80bfb]
The picture is of a prototype and has some minor differen...
***Module-loading Side [#nfa74a03]
|Professional edition|Lite edition|
|&ref(doc_001.png);|&ref(doc_004.png);|
1: USB Port~
USB Micro-B Port for power supply and connection to a PC.~
2: DC IN (only in GMC-MB2PRO)~
Insert here the power extension cable (included in the GM...
3: microSD card slot~
4: Breakout connector (only in GMC-MB2PRO)~
5: Reset Switch~
Resets G.I.M.I.C to the initial state, i.e. the state it'...
6: 3.5mm mini-stereo jack~
Connect your headphones / loudspeakers here.~
7: Jog Wheel (or Volume Pot in GMC-MB2LT)~
Std/Pro G.I.M.I.C can be controlled through this wheel by...
Lite edition has a volume pot in place of the jog wheel. ...
8: Extention I/F (currently not in use)~
To connect accessories to be released in the future.~
9: Host I/F~
Connect a sound chip module to this port.~
10: USB Standard-A port (only in GMC-MB2PRO; currently no...
For a future project to control USB devices from G.I.M.I....
Supplies 100mA of output current.~
11: Front Panel Header~
To be used with Abee aluminium case.~
***Component Side [#b6873f98]
|Professional edition|Lite edition|
|&ref(doc_002.png);|&ref(doc_005.png);|
1: Power Switch~
2: The POWER & the STATUS LEDs~
Indicate the current power state and operation mode.~
3: Analog IN Jack~
To feed in the analogue output from modules.~
4: Expansion Module Slot (currently not in use)~
To be used for future expansion.~
Note that it's NOT a slot for a button cell battery.~
***Breakout cable (for GMC-MB2PRO only) [#db67e6fb]
&ref(doc_003.png);~
1: MIDI I/O (currently not in use)~
For future project for G.I.M.I.C to be used as a MIDI ins...
2: Line I/O~
We adapted BF-BOCMKH for our particular use, so that the ...
-Parallel-out OFF (default)~
Line IN : outputs no signal~
Line OUT: outputs all audio signals (PCM and other sounds...
-Parallel-out ON~
Line IN : outputs audio signals from the module currently...
Line OUT: outputs PCM sounds~
Output signal from the "Line IN" port bypasses G.I.M.I.C'...
3: 6.5mm phone jack~
Use this instead of the 3.5mm jack on the motherboard for...
4: Connector to GMC-MB2PRO~
**Before You Start [#tfc1e19e]
There are a few steps to follow before you start up your ...
***Updating the Firmware [#x4cad2a7]
Please update the G.I.M.I.C firmware to the latest versio...
***Installing the Driver [#dac0c7a4]
For your PC to recognize G.I.M.I.C as a USB Device, it ei...
-G.I.M.I.C driver ver. 2013/05/23: &ref(gimic-win-driver-...
// この箇所、ドライバ更新に合わせてアップデートすること
After extracting the .7z, run &color(red){dpinst-x86.exe}...
Users of 64-bit OS should run &color(red){dpinst-amd64.ex...
***Preparation for third-party applications [#j10a104c]
You need to install c86ctl to be able to control G.I.M.I....
Download the latest version from the link below.~
-c86ctl v1.4.4 (2013/10/13): &ref(c86ctl_1.4.4_32bit.zip);~
// c86ctl 更新に合わせてアップデートすること
Copy the extracted c86ctl.dll to the same directory as th...
Also, c86ctl depends on Visual C++ 2010 Runtime. Install ...
-[[Microsoft Visual C++ 2010 SP1 Redistributable Package ...
***Preparing Song Files [#x7acd568]
You can find song files to be used for test purposes [[he...
When G.I.M.I.C is in USB mode, files can be played from t...
G.I.M.I.C can also play songs without the aid of external...
**Controlling G.I.M.I.C [#yee9eee8]
G.I.M.I.C can operate in two modes: Standalone mode and U...
The way G.I.M.I.C is controlled varies depending on which...
***Connecting to the power source [#j48c22df]
Connect G.I.M.I.C to a PC via USB, or to an external powe...
-When AC adaptor is connected before USB, the STATUS LED ...
-Note that G.I.M.I.C determines whether its power is supp...
***Standalone mode [#g4ce196e]
'''This section is an abstract from a more fully detailed...
-Start a terminal emulator that can emulate VT100 (such a...
-Make sure that an SD card is inserted in the card slot (...
-Press the power switch. The POWER LED will light up and ...
When the OS has successfully started, the terminal emulat...
-Press any key on your keyboard.~
Filer screen will show up, where you can control G.I.M.I....
Below is the list of controls.~
Up-arrow move the cursor up
Down-arrow move the cursor down
Right-arrow play the next song
Left-arrow play the previous song
PageUp scroll up one page
PageDown scroll down one page
HOME move to the previous folder
END move to the next folder
ENTER play song file / open folder
BackSpace move up one folder
F1 toggle AUTO (next song is automatically play...
F2 stop playing
F3 +1 to the number of times songs are looped
F4 -1 to the number of times songs are looped
F5 tempo up
F6 tempo down
F7 change playback mode (normal/repeat current ...
F8 go to the setup screen
-Using the Jog Wheel (Pro/Std only)~
You can also control G.I.M.I.C with the jog wheel on the ...
To enable this feature, press in the jog wheel after star...
Each time you press the jog wheel, the STATUS LED alterna...
This indicates the current set of function the jog wheel ...
--When the LED is off~
Turning the wheel: change output volume~
Turning the wheel while pressing it: play/stop~
--When the LED is on~
Turning the wheel: play next/previous song~
Turning the wheel while pressing it: open next/previous f...
***USB mode [#p7b406d9]
'''This section is an abstract from a more fully detailed...
-Make sure that there is no SD card inserted in the card ...
-Press the power switch.~
Power/Status LED will light up and G.I.M.I.C's OS will be...
-When the OS has successfully started, the PC will recogn...
If it's the first time you connect G.I.M.I.C to the PC, y...
-Launch any applications that support G.I.M.I.C~
-Using the Jog Wheel~
Turning the wheel changes output volume.~
Pressing the wheel toggles parallel output on/off. Each t...
|>|>|Parallel Output|
|STATUS LED|off|on|
|Line IN|unused|audio signals from the module|
|Line OUT|all audio signals|PCM sounds|
***Turning off your G.I.M.I.C [#se9be492]
Press the power switch to cut off the power. G.I.M.I.C wi...
G.I.M.I.C continues to consume a small amount of power wh...
***Supplementary Information [#ia61c357]
-Breakout cable's Line "IN" and OUT: which to use?~
Line OUT is generally better suited for connection with a...
Line IN is better suited for connection with a high-spec ...
ページ名: